Down bars in the trunk. Not quite on the frame, but as close as it's going to get. Clears the headlinerSubframe connectors welded in. Looks like seagulls did the welding, but they didn't fall off when I pulled out the jack. Back from finish welding at the chassis shop. This is an S&W cage, which I tacked in and had finish welded by a professional. Built and welded in the subframe connectors at home. The only notching I had to do was for the "pro street" bars that go through the package tray. Everything else came ready as is, with extra material in the door bars for fitment. Now if it would just warm up enough to paint the bars before they rust, I'll be happy. Oh, and get the motor ready too.