|
|
Item Posts
Sort Order
|
|
|
Front seat bolts and spacers
|
chuck64
New User
| Posts: 1
| Joined: 01/08
Posted: 01/23/08
05:00 PM
|
|
I recently purchased a 1964 1/2 Mustang convertable. I'm replacing the carpeting and in doing so I removed the seats. I didn't pay too close attention to the parts and can't find where 4 bell shaped spacers go. The bolts on the drivers seat are diffrent lengths, but the spacers will not work on the shorter bolts. I've talked to almost all the Mustang folks around here, and found no help. I need a drawing. Can anyone help me? Thanks, Chuck 
|
|
|
|
|
Posted: 01/24/08
02:48 PM
|
|
I'm not super familiar with the '64 1/2 seat mounting (I know the passenger side was a fixed mount, but I've never taken one apart)...
Can you post up a photo of the part? It might help others jog their memory...
HTH...
Mark
Mark Houlahan
Editor
Modified Mustangs & Fords Magazine
1965 FFR Roadster 427W/TKO-600
1966 Mustang 289-4V/C4
1968 Mustang 4.6L Three-Valve/5R55S auto
1990 Mustang 347/AOD
1998 Escort 2.0L SOHC/F4E-111 Auto
2002 Explorer Sport Trac 4.0L V-6/5R55 Auto
|
|
|
|
|
|
|
|
|