|
|
Item Posts
Sort Order
|
|
|
Gauges
|
|
Posted: 06/22/08
04:41 AM
|
|
Has anyone installed Stewart Warner gauges on their Mustang? I got a '66 mustang, and want to install after-market gauges, and Stewart Warner has these really nice gauges that have that muscle car look, Power Series. They are the same size as the original gauges, and was wondering if they fit on the standard '66 instrument bezel?
thanks.
|
|
|
|
|
Posted: 06/23/08
05:48 AM
|
|
The only way to fit aftermarket gauges to the stock bezel is to use an adapter plate. National Parts Depot used to show one in their ad, so I would check with them. It basically allows you to bolt in aftermarket gauges using your stock bezel. There will be some wiring modifications involved too, just an FYI...
HTH...
Mark
Mark Houlahan
Editor
Modified Mustangs & Fords Magazine
1965 FFR Roadster 427W/TKO-600
1966 Mustang 289-4V/C4
1968 Mustang 4.6L Three-Valve/5R55S auto
1990 Mustang 347/AOD
1998 Escort 2.0L SOHC/F4E-111 Auto
2002 Explorer Sport Trac 4.0L V-6/5R55 Auto
|
|
|
|
|
Posted: 06/23/08
08:09 AM
|
|
Thanks for the reply. I found a an after-market bezel for the gauges. I hope the wiring modification isn't too bad, since the gauges are mechanical too.
Thanks again!
|
|
|
|
|
|
mata0602
New User
| Posts: 3
| Joined: 11/08
Posted: 10/14/09
10:43 AM
|
|
Mp Products Carries the support plates for aftermarket gauges to fit on the original bezels.
contact Andy Jr.
928-772-7715
toll free: 866-602-3423
|
|
|
|
|
|
|