|
|
Item Posts
Sort Order
|
|
|
i guess this is a good place for a classified ad?
|
|
Posted: 04/29/09 04:03 PM
|
|
if this isnt the right place please redirect me or move the post thanks
i have a 69 coupe id like to get out of my yard (so i can get something else) it is a rolling chassis and it is a major project perfect dragcar/restomod canidate it can be restored its really not that bad for an ohio car
someone once started to do a resto on it lets say they tried real hard and most of thier welds left something to be desired and then it got parted out i got it for parts for my gf's car
it was an original 302 auto,powersteering drum brake (manual) meadowlark yellow black interrior black vynil top it has a 2:79 8 inch axle
its about 85% complete (rolling chassis)
major missing items are hood (the one in the pics is rusted junk) grille gas tank the one in it has a hole in it windshield driver side door glass rear bumper brakets correct bucket seats/ tracks (i have a pair of i think mid 80's mustang seats in it and they go with it)
it does have a clear ohio title the original drivers door is long gone along with the door tag
as i said this is a project i currently have it listed in other places (not ebay yet) im asking $700.00 OBO or trade for 69 mustang parts or a ford big block and auto trans id prefer a 390, 429, 428, 406, 427 and i might consider a 460 (least desired) for my 57 ford sedan im building and also parts for 57 ford would also consider a partial trade on a 9inch 3rd member (complete) would also consider a bb ford powered parts/project car or what do you have to trade? it doesnt matter to me what body im just looking for a ford big block
im very willing to deal the car is located in hamilton ohio and it has to picked up my truck is down at the moment if you want to trade a car for it yours has to be drivable or you need to deliver it
pm me here or email me at stangrunner@fuse.net
here is a link to some pics of it (old pics)(the car is more assembled now just so the city wouldnt hassle me) some of the parts in the pics dont go with it they have been replaced with other parts though let me know if you would like to see better pics of it
******************************PICTURE LINK BELOW*********************************** http://www.kodakgallery.com/ShareLanding.action?c=b2ouskar.codi2z17&x=0&h=1&y=-ov1mou&localeid=en_US *********************************************************************************** dont be afraid to make an offer and ask any questions you need to
i also have a roof from a 69 fastback that could be availible also (i was thinking of doing a fastback conversion)
i hope this is an ok place for this post since its my first post here if its not tell me im a fast learner
|
|
|
|
Falcon67
Enthusiast
| Posts: 433
| Joined: 12/06
Posted: 04/30/09 05:10 AM
|
|
With the condition of the car in mind, I think if someone offers you a good 3rd member you should take it. It's maybe $500 worth of car, maybe. Based on the current worth of FE engines, if you did get an offer of a 390 best grab it before the swapper sobers up. A rebuildable 428 is worth about 10 times what the car is worth, a 427 about 40 times. A good 460 core runs about $500 or so.
1967 Falcon 4 door 351C-4V 1970 Mustang 351C-2V http://raceabilene.com/kelly/hotrod Owner built, owner abused.
|
|
|
|
|
Posted: 04/30/09 12:11 PM
|
|
i dont know how to respond to this but i tell you it isnt favorable when was the last time you priced a 69 mustang in any shape
are you from out west someplace? if you are then i might understand because i know our (ohio) rebuilders all look like junk to the people who live out there
|
|
|
|
|
|
|
Posted: 04/30/09 04:05 PM
|
|
Well, not to be a 3rd wheel or a 3rd member(!) but before feelings are hurt and yada, yada, yada, I would like to point out that a picture is worth a 1000 words. I have always found when posting an item for sale that a picture goes a long ways to satisfying the curiosity of a potential buyer.
Post some pics 57fordsedan!
Good luck,
Steve
Member of COUGAR CLUB OF NEW ENGLAND (#25) www.necougarclub.com Member of DODGE TRUCK WORLD (Maine Chapter) http://dodgetruckworld.tenmagazines....ry.asp?id=4871
2006 Ford Mustang 1970 Mercury Cougar (19,300 miles ) 2003 Dodge Ram 4x4 Quadcab 1994 S-10 Blazer Tahoe 1968 Mercury Cougar DGS (Parting Out)
Retired Navy (Submarine Service) E-7 MMC(SS) USS Simon Bolivar SSBN-641 (B) USS Henry M. Jackson SSBN-730 (B) USS Gurnard SSN-662
Shipfitter @ Bath Iron Works in Bath, Maine. Building Aegis class destroye
|
|
|
|
|
Posted: 04/30/09 07:56 PM
|
|
there is a link to about 31 pics in the ad doesnt the link work?
well i guess it doesnt it will shortly 
ok i put a link in the original post and here it is again these are older pics is has changed since these pics were taken http://www.kodakgallery.com/ShareLanding.action?c=b2ouskar.codi2z17&x=0&h=1&y=-ov1mou&localeid=en_US
i know the car aint a jewel and thats why im not asking a barret jackson price out of it i just want it out of my yard cause i have a line on something else
i really dont need or want anymore sarcasim
|
|
|
|
gclark
Administrator
| Posts: 63
| Joined: 07/06
Posted: 05/01/09 07:36 AM
|
|
Hey 57,
I edited your post so the link is live now. As far as where this post should go, we don't have a classified section right now. We'll leave it here.
Good luck with your sale!
Greg MMF web guy
|
|
|
|
|
Posted: 05/01/09 09:18 PM
|
|
thanks for your help greg
|
|
|
|
Falcon67
Enthusiast
| Posts: 433
| Joined: 12/06
Posted: 05/03/09 06:32 PM
|
|
Sorry - no sarcasm intended. For a relative value, a good 428 block at the swap meet this last weekend was $2750. $700 is a reasonable request for the car, considering the condition in the pictures.
1967 Falcon 4 door 351C-4V 1970 Mustang 351C-2V http://raceabilene.com/kelly/hotrod Owner built, owner abused.
|
|
|
|
|
|
|