Posted: 04/20/10 07:19 PM
You'll have to click over to my blog to view pics and vids.
The last I blogged about my Mustang I had finished up the installation of the new dash pad and replaced all the bulbs and cleaned up a few years of dust.
If you recall (well you don’t have to, just go back and read the posts) I talked about planning and how I could have saved time by waiting to put new dash pad on (not cap, pad) until the pillar molding came, but I decided not two. The molding came in today….so would with the old….
Old cracked and broken
And in with the new:
I have pretty good luck with Mustang Unlimted’s parts and service. I recommend them. (No I don’t get paid for plugs or compensated.)
These will have to be painted which is very common with interior parts. I even had to paint the replacement arm rest. I have the paint and I’ll post up the entire process.
I finally got the exhaust manifold taken care of (I didn’t do it). But apparent when I had the custom exhaust with hooker headers created and installed, they didn’t use locketight and they loosed up with the vibration of daily and drag strip racing. The right side had to be replaced and the left side was just tightened. Oh she sounds so much better.
Thanks for reading. I’ll get the pillar molding replacement pretty quick.
Average Guy's Car Restoration, Mods and Racing