• Subscribe to a Magazine
Item Posts    Sort Order

Identify my tranny. And question about kickdown

 
Rohan-2
New User
Posts: 16
Joined: 07/13
Posted: 03/05/14 12:31 PM

I have a 79 mustang, I am putting together. 302 motor. The tranny has no tag. but the cast number is RF-E2AP-7006-AA. I installed the rear end from a 86 mustang hatchback with 5.0HO. The drive shaft from the 86 was a perfect fit for length, and fit in my tranny. I have read so much different info regarding the cast numbers, I do not know if it is a C4 or C5.
I also need to know which kick down rod I need to use. Is it the same as the early models with a C4 and 302 motor? Will that work?
Any help appreciated,  

Post Reply
wayne712222
User
Posts: 127
Joined: 10/13
Posted: 03/06/14 08:56 AM

11 bolt pan with an E2 casting number is more than likely going to be a C5... with a spring loaded lock up converter..


i seem to recall that the AOD came out in 83..... it has a 14 bolt pan..


there is  version of the C3 transmission called the A4LD.. 4r44E and 4R55E with an 18 bolt pan.  

Post Reply